LNG Orientation

Step 1 of 37

Welcome

The purpose of this LNG site orientation is to provide workers with guidelines to work safely at the Yukon Energy Whitehorse gas generation facility (WG0).

ALL WORKERS are required to complete the YEC Health and Safety/Environmental orientations prior to starting work at YEC.
NOTE – LNG delivery drivers are exempt.
If you HAVE NOT completed the YEC Health and Safety/Environmental orientations, CLICK HERE.

If you have completed the YEC Health and Safety and Environmental orientations, click NEXT below.
If you have any questions, please contact your YEC Project Manager, or YEC H&S department.

Save and Continue Later

Name*
First Last
Company*
City*
Prov/Terr*
Does your company have one of the following?*
- Certificate of Recognition (COR)
- Small Employer Certificate of Recognition (SECOR)
- Temporary Letter of Certification (TLC) for one of the above
- None of the above
Project Name*
Type of Work Conducted*
Are you delivering LNG?*
- Yes
- No
Confirm that you have completed the H&S orientation*
- Yes
- No
Mobile/Cell Number*
Required for LNG Drivers only.
YEC Contact Name*

Save and Continue Later

A few things about this orientation:
- It will take approx. 30-45 minutes to complete the orientation.
- Your input will be logged in a database for review by Yukon Energy Health & Safety department.
- You will be issued a hard hat sticker via the YEC contact listed.
- Regarding the pop-up windows, you can print this information. To print these, simply click the print icon at the top left of the window.
- The LNG orientation is valid for 2 years only.

Save and Continue Later

COVID 19

CLICK HERE to view Yukon.ca Covid-19 information.

CLICK HERE to view Covid-19 symptoms.

CLICK HERE to view Yukon.ca Safe 6 plus 1 information.

CLICK HERE to view the Safe 6 plus 1 poster.
I have read/reviewed and understand the Covid-19 information provided.
- Yes

Save and Continue Later

LNG – Properties & Hazards

Click here to read YEC SWP-106.

Liquefied natural gas (LNG) is natural gas that is cooled to -160°C (–260°F) to form a cryogenic liquid.

LNG is comprised of 4 main components:

Methane; 83% - 99%
Ethane; 1% -13%
Propane; 0.1% - 3%
Butane; 0.2% - 1%

LNG occupies 1/600th it’s volume in a liquid state.

LNG has an expansion rate of 600:1 (liquid to vapour).

LNG is odourless, colourless, non-corrosive, and non-toxic.

LNG is lighter than air.

LNG is not flammable in the liquid state.

LNG release results in evaporation and formation of a visible vapour cloud.

Ignition temperature is approx. 537°C (1000°F).

Flame temperature is approx. 1370°C (2500°F).

LNG vapour is non-toxic; but is an asphyxiate.

As LNG vapour concentrations rise, the LFL (5%) will be reached long before the dangers of O2 deprivation are present.

LNG vapour is flammable when mixed with air. The flammable range is 5%; lower flammable limit (LFL) to 15%; upper flammable limit (UFL).

I have read/reviewed and understand the LNG – Properties & Hazards information.
- Yes

Save and Continue Later

1. What is the main component of LNG?*
- a) Propane
- b) Butane
- c) Methane
- d) Natural gas
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.
2. LNG vapour is:*
- a) Lighter than air
- b) Visible (as a cloud) when evapourating
- c) Non-toxic
- d) All of the above
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.
3. What is the flammable range of LNG vapour?*
- a) 0 - 100%
- b) 2.5 - 10%
- c) 5.0 - 15%
- d) None of the above
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.
4. Which of the following best describes LNG?*
- a) Compressed gas
- b) Cyrogenic liquid
- c) Flammable liquid
- d) All of the above
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

LNG – Properties & Hazards

POTENTIAL HAZARDS	POTENTIAL INJURIES OR DAMAGE
Contact with LNG	(Cold) burns and frostbite.
Contact with LNG equipment/piping; cold surfaces	Skin adhesion and frostbite.
LNG (vapour) release	Breathing discomfort; frostbite; asphyxiation. Fire or explosion.
High pressure	Bodily injury

There is also a cryogenic hazard to equipment & structures.

When LNG spills on the ground or water it vapourizes quickly and leaves behind no residues.

LNG released to the ground or water will result in a visible cloud as the LNG warms.

LNG will evapourate 5X faster in water.

Vapour cloud size and shape depend on wind speed.

I have read/reviewed and understand the LNG – Properties & Hazards information.
- Yes

Save and Continue Later

5. What hazards does LNG or LNG vapour present?*
- a) Frostbite
- b) Breathing discomfort
- c) Fire
- d) All of the above
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.
6a. When LNG spills on the ground or water it ________________*
- a) is absorbed
- b) is toxic
- c) settles in low areas
- d) vapourizes quickly
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.
6b. and leaves behind ________________.*
- a) toxic waste
- b) a big mess
- c) no residues
- d) LNG burns
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

Yukon Energy LNG facility
I have read/reviewed and understand the Yukon Energy LNG facility information.
- Yes

Save and Continue Later

LNG General Site Rules

The purpose of the LNG General Site Rules is to provide workers with the guidelines to work safely at the YEC Whitehorse Gas generating facility (WG0).

CLICK HERE to read/print YEC SWP-100.
I have read and understand YEC SWP-100; LNG – General Site Rules.
- Yes
It is recommended that SWP-100 is printed for your reference.

Save and Continue Later

Minimum PPE Requirement

Refer to YEC SWP-100; LNG – General Site Rules Section 2.0

CLICK HERE to read/print YEC SWP-100.

The following PPE must be worn at the WG0:
- Safety headwear; Class E, type II;
- Safety footwear with dielectric rating;
- Safety eyewear with side shields;
- Personal gas detector; bumped and calibrated; and
- Hearing PPE (as req’d).
When working with/near LNG, take the following precautions:
- Wear proper clothing and protective gear while working around LNG; especially if making/breaking connections.
- DO NOT allow liquid to splash, spill or leak.
- Protect your eyes and face; cover skin wherever the possibility of contact with liquid, cold equipment or cold gas exists.
- Use clean, easily removable insulated gloves and long sleeves for arm protection.
- Use cuffless trousers, worn over the boots to allow spilled liquid to be shed away from the body.
I have read/reviewed and understand the Minimum PPE Requirement information.
- Yes

Save and Continue Later

7. What is the minimum required PPE to enter WG0? (Click all that apply)
- Safety headwear
- FR clothing
- Half-mask respirator
- Hearing protection as required
- Safety footwear
- Safety eyewear with side shields
- Personal gas detector
- Cryogenic PPE
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

Site layout

Refer to YEC SWP-100; LNG – General Site Rules Section 3.0 and Appendix A

CLICK HERE to read/print YEC SWP-100.

Please review Appendix A; WG0 plant layout on page 6.
It is important that workers know the following:
- location of entrances and exits;
- locations of 1st aid kits and eye wash stations;
- locations of fire extinguishers; and
- location of phones.
I have read/reviewed and understand the Site layout information.
- Yes

Save and Continue Later

8. Workers at WG0 must know where the following equipment is located. (Click all that apply)
- Parking
- Site exits
- Wind sock
- Phones
- First aid kit
- Washrooms
- Fire extinguishers
- Eye wash
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

Permission to enter WG0.

Refer to YEC SWP-100; LNG – General Site Rules – Section 3.4

CLICK HERE to read/print YEC SWP-100.

PERMISSION IS REQUIRED TO ENTER WG0.

All workers are required to check in/out with the System Control Center (SCC) Operator-in-charge (OIC).
See SWP-100; Appendix B – YEC check in/out protocol.
I have read/reviewed and understand the Permission to enter WG0 information.
- Yes

Save and Continue Later

9. Who must worker(s) check in with?*
- a) Fire department
- b) YEC Health & Safety
- c) System Control Center Operator-in-Charge
- d) Site coordinator
- e) None of the above
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

‘Person-check’

Refer to YEC SWP-100; LNG – General Site Rules – Section 3.5

CLICK HERE to read/print YEC SWP-100.

All persons working alone at WG0 are required to start a ‘person-check’ with the SCC OIC; and, contact the SCC OIC every two (2) hours after the original person-check.
This check-in procedure must continue until the worker has completed their work; or, is leaving the WG0.

For clarity –
More than 1 worker on site; workers are not working on the same task or in the same immediate area – ‘PERSON-CHECK’ IS REQUIRED.
More than 1 worker on site; all are working on the same task or in the same immediate area – ‘person-check’ is not required while the criteria is met.

Click here to view/print YEC SWP-007; Travelling to remote locations or working alone.
I have read/reviewed and understand the ‘Person-check’ information.
- Yes

Save and Continue Later

10. Once a person-check has been started, how often must a worker check in?*
- a) 90 minutes
- b) 1 hour
- c) 2 hours
- d) Not required
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

Coordinate Work with Operations

Refer to YEC SWP-100; LNG – General Site Rules – Section 3.6

CLICK HERE to read/print YEC SWP-100.
All work at WG0 must be approved and coordinated by the Operations department. All workers are required to inform the Operations department of the following:
- Scope of work;
- Date(s) of the work;
- Duration of the work;
- Number of workers; and
- Equipment requirements.
Inform one or more of the following Operations personnel: Supervisor Thermal Maintenance or Director Operations.
I have read/reviewed and understand the Coordinate Work with Operations information.
- Yes

Save and Continue Later

11. All work at WG0 must be approved and coordinated by the YEC _______________________ department.*
- a) H&S
- b) Operations
- c) Gas department
- d) Cryogenics department
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

Job Safety Analysis Requirement

Refer to YEC SWP-100; LNG – General Site Rules – Section 3.8

CLICK HERE to read/print YEC SWP-100.

All workers are required to complete a documented job safety analysis (JSA); prior to starting work.

The JSA must include an emergency response plan for the work undertaken.

YEC has a JSA specifically for WG0.
Click here to view/print.
I have read/reviewed and understand the Job Safety Analysis Requirement information.
- Yes

Save and Continue Later

12. A pre-job safety analysis is required prior to starting work at WG0.*
- a) True
- b) False
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

WG0 gates.

Refer to YEC SWP-100; LNG – General Site Rules – Sections 3.10 and 3.11

CLICK HERE to read/print YEC SWP-100.

WG0 gates are to be closed when not in use.

WG0 gate(s) to be locked when there are no workers on site.
I have read/reviewed and understand the WG0 gates information.
- Yes

Save and Continue Later

13a. The gates at WG0 must be ____________________ when not in use*
- a) Guarded
- b) Closed
- c) Propped open
13b. and _____________________ when there are no workers on site.*
- a) Barricaded
- b) Locked
- c) Closed
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

General Safety Requirements

Refer to YEC SWP-100; LNG – General Site Rules – Sections 4.1 to 4.3

CLICK HERE to read/print YEC SWP-100.

DO NOT use components (valves, gauges, fittings, etc.) or piping as steps or footholds. Always use appropriate equipment to access components for maintenance or repair.

Some of the WG0 components are pressurized. Follow all applicable procedures, practices, and safety precautions when working with/near pressurized equipment.

Locate the ‘RED’ Emergency Shutdown (ESD) button(s) in your WG0 work area(s). These are used to shut down parts of WG0 when an abnormal or unsafe condition is detected. For example, ESD at LNG offload pad, shuts down fueling system; ESD at WG1, shuts down WG1 only.

Refer to YEC SWP-100; LNG – General Site Rules – Section 4.4

The LNG substation is a separate YEC facility with other rules and requirements for entry.

DO NOT enter the substation unless trained and authorized to do so.
Click here to see substation signage.

Refer to YEC SWP-100; LNG – General Site Rules – Section 4.5

Permits are required for the following work:

All work that requires equipment to be out of service; including auxiliary and adjacent equipment, which directly impacts or could impede operation of the WG0.

Use of power tools, cameras, and cell phones in the Class 1, Zone II area (hot work permit required).
I have read/reviewed and understand the General Safety Requirements information.
- Yes

Save and Continue Later

14. Workers should know where the red emergency shutdown (ESD) buttons are located.*
- a) True
- b) False
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

Personal Gas Detectors

Refer to YEC SWP-100; LNG – General Site Rules – Sections 5.0

CLICK HERE to read/print YEC SWP-100.

YEC uses the Industrial Scientific, Ventis MX4 personal gas detection equipment at the WG0.

All YEC workers must be trained and deemed competent to use the Ventis MX4 system.

MX4 detectors must be bumped prior to use (once per day); and calibrated every 30 days.

MX4 detectors must be zeroed in fresh air and have the ‘peaks’ cleared after bump testing and/or calibration (prior to use).

Contractors may use their own detector provided they meet the bump/calibrate and training criteria above. Contractors required to use the MX4 system - The YEC Project Manager or Person-In-Charge is responsible to familiarize the contractor with the MX4 system.
I have read/reviewed and understand the Personal Gas Detectors information.
- Yes

Save and Continue Later

15. Personal gas detectors must be: (Click all that apply)
- Bump tested prior to use
- Calibrated every 30 days
- Cleared of peak readings
- Drop tested daily
- Zeroed in fresh air
- Tested for oxygen by breathing into detector
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

WG0 Alarms.

Refer to YEC SWP-100; LNG – General Site Rules – Section 6.0

CLICK HERE to read/print YEC SWP-100.

‘Tridents’ located throughout WG0 indicate the plant status:

GREEN – plant in a normal condition;

YELLOW – plant alarm condition; immediately leave WG0 and proceed to muster point at Millennium Trail gate (across from the YEC main office);

RED – plant alarm condition; immediately leave WG0 and proceed to muster point at Millennium Trail gate; then cross Millennium Trail bridge adjacent to Nisutlin Drive.

Click here to see Whitehorse Rapids Generating Station Muster Point Locations.

Click here to see example of muster point signage.

Refer to YEC SWP-100; LNG – General Site Rules

Generator modules have an orange strobe that indicates (general) alarm condition; including, fire or gas detection.

DO NOT enter modules when alarm activated; unless authorized by SCC OIC.
I have read/reviewed and understand the WG0 Alarms information.
- Yes

Save and Continue Later

16. When is a worker required to evacuate WG0? (Click all that apply)
- Green alarm/alert
- Yellow alarm/alert
- Red alarm/alert
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

17. The yellow alarm at WG0 is activated. Where is the muster point?*
- a) YEC diesel plant
- b) YEC office
- c) Millennium Trail gate
- d) Schwatka Lake boat launch
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

Work in Class 1, Zone II Area.

Refer to YEC SWP-100; LNG – General Site Rules – Section 7.0 and Appendix C

CLICK HERE to read/print YEC SWP-100.

See Appendix C – YEC LNG Area Classification Class I; Zone 2.

All work in the Class 1, Zone II area must be approved by the Operations department (Leadhand, Mechanical Maintenance; Sr. Maintenance Mechanic; Manager, Operations; or, Director, Operations).

Power tools, cameras, cell phones, flame producing tools (solder, oxyacetylene torch etc.) and hand tools that can cause a spark (steel shovels, hammers etc.) can only be used in the Class 1, Zone II area when a YEC Hot Work permit is completed and approved by Operations.

Use of brass hammers is permitted.
I have read/reviewed and understand the Work in Class 1, Zone II Area information.
- Yes

Save and Continue Later

18a. In the Class 1, Zone 2 area: power tools, cameras, cell phones, tools that can cause a spark may only be used if approved by ____________________________*
- a) H&S
- b) YEC Operations
- c) Gas department
- d) Cryogenics department
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.
18b. and if a ________________________ permit is in place.*
- a) Confined space
- b) Control system
- c) Hot work
- d) Cryogenics
Unfortunately you did not answer the question correctly. Please click the previous button to redo the lesson and answer the question again.

Save and Continue Later

Washroom facilities.

Refer to YEC SWP-100; LNG – General Site Rules

CLICK HERE to read/print YEC SWP-100.

There are no permanent washroom facilities at WG0. In the summer months, portable washrooms are maintained and available for use. When the portable washrooms are not maintained (typically winter months), please coordinate entry into one of the other Whitehorse generating facility buildings (Whitehorse Diesel plant; YEC corporate office).
I have read/reviewed and understand the Washroom facilities information.
- Yes

Save and Continue Later

Delivery Drivers (including LNG)

Refer to YEC SWP-100; LNG – General Site Rules – Section 9.0

CLICK HERE to read/print YEC SWP-100.

Repairs to vehicles and/or trailers are not permitted at WG0.

Yukon Energy will not supply air to accommodate repairs to vehicles and/or trailers.

In the event of a WG0 evacuation (yellow or red), driver is required to shut off vehicle. (if running).

Vehicles parked, for any length of time, outside the LNG site must activate the 4-way flashers (hazard lights); and, put out pylons or other markers, with reflective markings, at each corner of the truck/trailer that is adjacent to traffic (minimum 2 pylons; front and rear).

Drivers required to leave the vehicle are required to wear adequate hi-vis PPE.

Drivers required to leave the vehicle must ensure that doors are closed to avoid contact by another vehicle.
I have read/reviewed and understand the Delivery Drivers information.
- Yes

Save and Continue Later

YEC LNG reference documents.

Click on the SWP title to view/print.

YEC SWP-100;General Site Rules

YEC SWP-007; Travelling to remote locations or working alone

YEC SWP-044; Hot Work and Permit

YEC SWP-103; LNG - Personal Protective Equipment (PPE)

YEC SWP-106; LNG Properties and Hazards
YEC SWP-107; LNG – First Aid Measures

YEC SWP-108; Work in Containment Pit

YEC LNG JSA/Tailboard/rescue plan

Save and Continue Later

Thank you.

Thanks for taking the time to attend this orientation; and, for your commitment to health and safety.

The LNG orientation is valid for 2 years only.

If you have any questions regarding LNG and the Yukon Energy Whitehorse gas generation facility (WG0), please contact your Yukon Energy Project Mgr., or the Yukon Energy Health and Safety dept.

Melanie Pettefer,CRSP,CSHC
Manager, Health & Safety
#2 Miles Canyon Road
Box 5920, Whitehorse, Yukon Y1A 6S7
ph: 867.393.5353
cell: 867.334.2073
melanie.pettefer@yec.yk.ca

Once you click on the submit button below, the orientation will be completed and you will receive a printable certificate to the email address you enter below.
Email*
CAPTCHA

Save and Continue Later

Navigation

Step 1 of 37

Welcome

COVID 19

LNG – Properties & Hazards

LNG – Properties & Hazards

Yukon Energy LNG facility

LNG General Site Rules

Minimum PPE Requirement

Site layout

Permission to enter WG0.

‘Person-check’

Coordinate Work with Operations

Job Safety Analysis Requirement

WG0 gates.

General Safety Requirements

Personal Gas Detectors

WG0 Alarms.

Work in Class 1, Zone II Area.

Washroom facilities.

Delivery Drivers (including LNG)

YEC LNG reference documents.

Thank you.